PET PA Splittable Bicomponent Spunlace Microfibre India — Favourite Fab Raw Material Supply
PET PA splittable bicomponent spunlace microfibre is a precision engineered raw material used in high-performance nonwoven manufacturing. Favourite Fab supplies this advanced bicomponent fibre to hygiene product makers, medical textile manufacturers, and technical textile producers across India and internationally. Our bicomponent nonwoven fabric manufacturing expertise gives us deep knowledge of splitting fibre geometry and spunlace processing requirements.
What Is PET PA Splittable Bicomponent Fibre
PET PA splittable bicomponent fibre combines polyethylene terephthalate (PET) and polyamide (PA) in a single filament. The two polymers are arranged in a pie-wedge cross-section. During hydroentanglement, water jets apply mechanical force that separates the wedge segments.
The result is ultra-fine microfibre filaments below 0.3 denier. These microfibres interlock during spunlace processing to form a dense, soft, and highly absorbent nonwoven web. The final fabric has significantly higher surface area than standard spunbond or carded nonwovens.
This technology is used wherever softness, absorbency, and filtration efficiency must combine. Medical wipes, cosmetic face masks, surgical drapes, and filtration media are typical end-use applications.
PET PA Splittable Bicomponent Fibre — Specifications and Options
| Parameter | Specification | Detail |
|---|---|---|
| Fibre Type | PET/PA 50/50 splittable bicomponent | Pie-wedge 16-segment geometry standard |
| Pre-split Denier | 2.0 – 4.0 denier | Custom denier available on request |
| Post-split Denier | <0.15 – 0.3 denier | Microfibre after hydroentanglement |
| Fibre Length | 38 mm / 51 mm | Suitable for spunlace carding lines |
| Split Ratio | >95% splitting efficiency | Achieved at standard spunlace pressures |
| Tenacity | 3.5 – 4.5 g/den | Pre-split measurement |
| Moisture Regain | 0.4% (PET) / 4.5% (PA) | Blended moisture absorption behaviour |
| Finish | Hydrophilic or standard | Specify at order — affects wetting speed |
Applications in Hygiene and Medical Manufacturing
PET PA splittable bicomponent spunlace microfibre is a critical raw material across several high-value product categories. Hygiene product manufacturers use it for ultra-soft topsheets and acquisition layers in premium sanitary pads and adult incontinence products. The microfibre structure delivers softness comparable to woven materials at lower cost.
Medical nonwoven manufacturers use this raw material for surgical wipes, wound contact layers, and sterile draping fabric. The dense microfibre structure blocks particulates while remaining permeable to fluids. Cosmetic wipe manufacturers source this fibre for facial masks and makeup removal pads requiring both softness and wet strength.
Industrial applications include fine filtration media, polishing pads, and abrasion-sensitive cleaning products. See our spunlace nonwoven fabric range for finished fabric options, or our bicomponent fibre technology overview for further technical background. Manufacturers requiring bico spunbond should also review our PE PP bico spunbond nonwoven fabric range.
Why Source From Favourite Fab
- MOQ-friendly — suitable for small and large manufacturers
- Export-ready — ships raw materials to 50+ countries
- ISO certified manufacturing facility
- 10+ years supplying the hygiene and medical industry
- Custom specifications available on request
Favourite Fab operates as an upstream raw material supplier. We do not produce finished consumer products. Our role is to supply consistent, specification-grade fibre to nonwoven manufacturers who need reliable batch-to-batch performance. Technical data sheets and conformance certificates are available for all product grades.
Pricing and MOQ
PET PA splittable bicomponent fibre is priced based on denier, fibre length, segment count, and order volume. Favourite Fab offers competitive wholesale pricing for both trial and production quantities. MOQ starts at 500 kg for standard grades. Custom grades require a minimum production run — contact us for details.
Pricing is provided on request after receiving your technical specifications. Send your requirements to receive an indicative quote within 48 hours. Bulk pricing tiers apply for orders above 5,000 kg per month.
How to Order
- Send your material requirements to sale@favouritehub.com
- Receive a quote and sample within 48 hours
- Confirm order and production begins
Frequently Asked Questions
Q: What denier is the PET PA fibre before splitting?
A: Standard pre-split denier is 2.0 to 4.0 denier. Post-split microfibre falls below 0.3 denier depending on segment count and hydroentanglement pressure.
Q: Does Favourite Fab supply PET PA fibre for spunlace processing only?
A: PET PA splittable bico fibre is primarily designed for hydroentanglement (spunlace) processing. It can also be used in wet-laid and some airlaid systems if sufficient mechanical energy is applied to achieve splitting.
Q: What is the typical split efficiency on standard spunlace lines?
A: On well-maintained lines running at 80–120 bar water pressure, split efficiency exceeds 95%. Lower pressures reduce efficiency and leave unsplit segments that affect fabric softness and absorbency.
Q: Can the PET/PA ratio be customised?
A: Standard supply is 50/50 PET/PA by weight. Custom ratios such as 70/30 or 60/40 are available with minimum production commitments. Different ratios alter moisture behaviour and post-split fibre stiffness.
Q: What certifications does Favourite Fab hold for this fibre?
A: Favourite Fab holds ISO certification for its manufacturing facility. Test reports covering denier, tenacity, crimp, and fibre length are available with each batch. OEKO-TEX certification is available on select grades — please enquire at order stage.
Q: What is the minimum order quantity for PET PA splittable bico fibre?
A: MOQ is 500 kg for standard grades. Sample packs of 5–10 kg are available for line trials prior to production orders.
Contact Favourite Fab
Email: sale@favouritehub.com
WhatsApp: +91-9528811566
Send your material specifications today for a same-day quote.
Gaurav Garg
I'm Gaurav Garg, CEO of Favourite Fab, a company on a mission to revolutionize the nonwoven industry with sustainable practices. We work hand-in-hand with manufacturers and suppliers who share our commitment to eco-friendly production. With a deep interest in textile innovation, I'm passionate about educating consumers about sustainable material options and their potential to transform the nonwoven landscape.
