Sanitary napkin release paper is the silicone coated liner that protects the positioning adhesive on the back of a sanitary pad. Favourite Fab supplies it to sanitary napkin, panty liner and adult incontinence pad makers. We are based in Agra, India, and exporting since 2011. Buyers get custom slitting, samples and MOQ-friendly orders.
What Is Sanitary Napkin Release Paper?
Every sanitary pad has a strip of pressure-sensitive adhesive on its back. This adhesive holds the pad in place on the garment. Before use, a release liner must cover it. That liner is sanitary napkin release paper.
The paper carries a thin silicone layer on one or both sides. The silicone lets the adhesive peel away cleanly without tearing the paper. A good liner releases smoothly and leaves the adhesive intact.
Release paper for sanitary napkin lines must run at high speed without breaks. It must also cut cleanly and stay flat during folding and wrapping. Our glassine base gives a dense, smooth surface for even silicone coverage.
Sanitary Napkin Release Paper — Specifications and Options
The table below lists our standard range. Any parameter not shown is set to buyer specification or matched to your sample.
| Parameter | Detail |
|---|---|
| Base paper | Glassine base paper |
| Coating | Silicone coating, single side or double side |
| GSM range | 29–100 GSM |
| Width | 10–320 cm, custom slitting to your line |
| Roll length | 500–2000 m |
| MD tensile strength | ≥40 N/15mm |
| Colour | White standard, custom shades on request |
| Printing | Custom flexo printing to buyer artwork |
| Release force | Matched to your pad adhesive and sample |
| Core size | To buyer specification |
| HSN code | 4811 |
Key Features
- Glassine base: dense, smooth paper from 29 to 100 GSM for consistent silicone coverage.
- Single or double side coating: choose one release side or two, based on your pad construction.
- Tensile strength: MD tensile of ≥40 N/15mm to resist web breaks at line speed.
- Wide format range: widths from 10 to 320 cm with custom slitting for main and wing liners.
- Long rolls: roll lengths from 500 to 2000 m to reduce splices and changeovers.
- Print-ready surface: custom flexo printing to buyer artwork for branded or patterned liners.
- Colour options: white standard, with custom shades on request.
Wing Release Paper for Sanitary Napkins
Wing release paper covers the adhesive on the side wings of a pad. It is separate from the main release paper on the pad centre. Many winged pad designs use both liners together.
Wing vs Main Release Paper
Main release paper is wider and runs along the full pad length. Wing release paper is narrower and sits under each folded wing. Both need a clean, even peel so the buyer can open the pad in one motion.
Some lines use one wide liner that covers both the centre and the wings. Others use a separate napkin release liner for each zone. We slit rolls to the exact width your machine needs for each position.
Wrap and Individual Pack Designs
In individually wrapped pads, the release paper can also act as the wrapper. The pad is folded inside the liner and sealed. This design needs a liner with good fold memory and print quality.
Our sanitary pad release paper supports both standard liner use and wrap-style packs. Tell us your pack format and we will match the grade to your sample.
Die-Cut Wing Liners
Many converters die-cut wing liners to follow the wing outline. The paper must cut cleanly without fibre dust or ragged edges. Our glassine base gives a firm, clean cut on rotary die systems.
Printed Wing Liners
Printed release paper lets you add a logo, pattern or usage hint to each wing liner. We offer custom flexo printing to buyer artwork. Printing is done on the release paper roll before it reaches your line.
PE Coated vs Silicone Glassine Release Paper for Sanitary Pads
Pad makers mainly choose between two liner bases. Each has a clear role on the line.
Silicone Glassine Release Paper
Glassine is a dense, smooth paper with low porosity. Silicone sits on the surface instead of soaking in. This gives a consistent release and a crisp feel. Glassine also die-cuts and prints well.
PE Coated Release Paper
PE coated release paper has a polyethylene layer between the paper and the silicone. The PE layer adds a moisture barrier and a softer hand feel. Some buyers prefer it for wrap-style packs.
Which Base Suits Your Line?
Choose silicone glassine when you need clean die-cutting, sharp printing and a firm liner. Choose PE coated when your pack design needs a barrier layer or a softer wrap. Favourite Fab supplies both, so you can test each on the same order.
Applications by Industry
Sanitary Napkin Manufacturers
Napkin lines use main and wing release liners on regular, ultra-thin and overnight pads. Our rolls are slit to each liner position and matched to your adhesive.
Panty Liner Manufacturers
Panty liners use a single narrow release liner over the back adhesive. These lines often run very fast. Our glassine liner offers the tensile strength to run without frequent breaks.
Adult Incontinence Pad Manufacturers
Adult incontinence pads use larger adhesive zones and wider liners. We supply wide rolls up to 320 cm for slitting on your own converting line.
How to Choose the Right Grade
- Release force: match the peel to your adhesive. A strong hot-melt needs a different release than a light one. Send a pad sample and we will match it.
- Base paper: pick glassine for die-cutting and print. Pick PE coated for barrier or wrap packs.
- Coating side: single side suits most liners. Double side helps when the liner also folds against another adhesive surface.
- GSM: lighter grades suit thin panty liners. Heavier grades suit wrap packs and wide liners.
- Width and length: give us your slit width and unwinder limit. We set the roll to fit.
- Print: share artwork early. Flexo printing is planned with the coating run.
Why Source Sanitary Napkin Release Paper From Favourite Fab
- Exporting since 2011 to buyers in India, the Middle East, Africa, Southeast Asia and Europe.
- Based in Agra, India, with direct factory supply.
- Both silicone glassine and PE coated release paper from one supplier.
- Custom slitting for main liners, wing liners and narrow panty liner widths.
- Custom flexo printing to buyer artwork.
- Samples available and MOQ-friendly order sizes.
- Grades matched to your sample, adhesive and line speed.
Pricing and MOQ
We offer competitive wholesale pricing on all release paper grades. Price depends on base, GSM, coating side, width, printing and order volume. Quotes are given on request after we review your specification.
Our MOQ-friendly terms suit new pad lines and trial runs. Larger converters can plan regular rolling orders with our sales team.
How to Order
- Send your specification or liner sample to sale@favouritehub.com. Include GSM, width, roll length, coating side and print needs.
- Receive a quote and a matched sample for line trials.
- Confirm the order. We produce, slit, pack and despatch to your plant.
Related Products
- Silicone Coated Release Liner Paper
- Printed Release Paper
- Glassine Release Paper
- PE Coated Release Paper
- PE Backsheets and Release Paper for Sanitary Pads
Frequently Asked Questions
Q: What is sanitary napkin release paper used for?
A: It covers the positioning adhesive on the back of a sanitary napkin or panty liner. The buyer peels it off before placing the pad. It keeps the adhesive clean during packing, storage and transport.
Q: What is the difference between main release paper and wing release paper?
A: Main release paper covers the central adhesive strip on the pad back. Wing release paper covers the adhesive on each wing. Wing liners are usually narrower and often die-cut to the wing shape.
Q: Which GSM range do you supply?
A: We supply silicone coated glassine release paper from 29 to 100 GSM. The exact grade is matched to your machine speed, pad design and sample.
Q: Can you print our artwork on the release paper?
A: Yes. We offer custom flexo printing to buyer artwork. Printed release paper is common for wing liners and individually wrapped pads.
Q: Do you supply PE coated release paper as well?
A: Yes. We supply both silicone glassine and PE coated release paper. Our sales team can help you compare both bases on your own line.
Q: What widths and roll lengths are available?
A: Widths range from 10 to 320 cm with custom slitting. Roll lengths range from 500 to 2000 m, matched to your unwinder.
Q: Are samples available before a bulk order?
A: Yes, samples are available. Send your current liner sample or specification to sale@favouritehub.com and we will match it.
Contact Favourite Fab
Email: sale@favouritehub.com
Phone and WhatsApp: +91 88007 75462
Send us your pad sample and liner specification today. Our team will match the right sanitary napkin release paper grade and share a quote with samples.




