A release paper roll for sanitary pads is the silicone coated paper that covers the positioning adhesive on the back of each pad. Favourite Fab, a raw-material supplier based in Agra, India, supplies this grade at 40–80 GSM in slit rolls, with a standard width of 180 mm. Pad makers and contract converters use it on the main adhesive strip, where the liner must unwind, cut and peel the same way on every shift.
This page is about the roll itself: grade, width, release level and how it runs on your line. For a full guide to main, wing and wrap liner designs, see our sanitary napkin release paper page. For the complete grade range across tapes, labels and medical uses, see our silicone coated release liner hub.
Where the Liner Sits on the Pad
Most pads carry a strip of hot-melt adhesive on the garment-facing side. The release paper is laid over that strip on the line and is peeled off by the user before wear. It has one job: protect the adhesive through folding, packing, storage and transport, then release cleanly. The paper does not touch the absorbent core or the cover layer.
Specifications
| Parameter | Detail |
|---|---|
| Product | Silicone coated release paper, slit rolls |
| GSM | 40–80 GSM (wider range 29–100 GSM on request) |
| Slit width | 180 mm standard; other widths slit to your machine |
| Coating | Silicone, single side standard; double side on request |
| Base paper | Glassine or PE coated base, to buyer specification |
| Release force | Matched to your positioning adhesive and sample |
| Colour | White standard |
| Printing | Plain standard; custom flexo printing on request |
| Core size | To buyer specification |
| HSN code | 4811 |
What to Check Before a Line Trial
- Release level: too tight and users struggle to peel; too easy and the liner lifts during folding. We match the grade to your hot melt adhesive for sanitary napkins.
- Width and edge: the slit width must sit inside your applicator guides with clean edges and no fibre dust.
- Unwind and splice: share your unwinder type, core size and maximum roll diameter so the roll fits without rework.
- Storage: keep rolls wrapped, flat and away from heat and damp. Run the trial with your own adhesive and pack format before a bulk order.
Related Materials
If your pack design needs a moisture barrier in the liner, compare our PE coated release paper. For the outer film layer of the pad itself, see our breathable PE film. All grades are supplied at competitive wholesale pricing, quoted by our sales team for your volume.
Frequently Asked Questions
What GSM is this release paper roll?
This grade runs at 40–80 GSM. Our wider silicone release paper range covers 29–100 GSM if your line needs a lighter or heavier liner.
What slit width do you supply?
Our standard slit width for this grade is 180 mm. We also slit to your machine width; send your drawing or a current roll label.
Which adhesive does the liner work with?
It covers the hot-melt positioning adhesive on the pad back. Release force is matched to your adhesive, so send an adhesive sample or grade name with your enquiry.
Is this the same as wing release paper?
No. This page covers rolls for the main pad-back adhesive strip. For wing liners, wrap-style packs and die-cut liners, see our sanitary napkin release paper page.
Can I get a sample roll before a bulk order?
Yes. Samples are available for a line trial. Email sale@favouritehub.com or WhatsApp +91 88007 75462 with your GSM, width and adhesive details.
Request a quote or sample: email sale@favouritehub.com or WhatsApp +91 88007 75462 with your GSM, slit width, core size and monthly volume.




