Surgical Gowns & Drapes
40–60 GSM SMS for AAMI Level 1–3 surgical gowns and surgical drapes. Hydrohead ≥100 mmH₂O provides fluid barrier protection while maintaining breathability for surgeon comfort during long procedures.
SMS Non Woven Fabric Manufacturer — India
SMS Fabric Manufacturer India —
15–80 GSM, Hydrohead ≥100 mmH₂O, ISO Certified
ISO 9001:2015 certified SMS (Spunbond-Meltblown-Spunbond) non woven fabric manufacturer. 15–80 GSM range, hydrohead ≥100 mmH₂O, Medical Blue and White. Used in surgical gowns, coveralls, face masks, and medical disposables. Factory direct from Agra, India.
Hydrohead ≥100 mmH₂O
ISO 9001:2015 Certified
30+ Export Countries
Technical Data Sheet
SMS Non Woven Fabric — Technical Specifications
| Parameter | Specification | Test Method |
|---|---|---|
| GSM Range | 15–80 GSM (custom up to 100 GSM) | ISO 9073-1 |
| Structure | Spunbond + Meltblown + Spunbond (tri-layer bonded) | — |
| Hydrostatic Head | ≥100 mmH₂O (standard); ≥150 mmH₂O (medical grade) | AATCC 127 |
| Tensile Strength (MD) | ≥30 N/5cm at 40 GSM | ISO 9073-3 |
| Roll Width | Standard 160 cm (63 inch); custom 10–320 cm | — |
| Colours | Medical Blue, White; custom on MOQ | — |
| Certifications | ISO 9001:2015, OEKO-TEX Standard 100 | — |
SMMS (double meltblown) available for higher hydrohead requirements. Request full TDS and test reports.
Applications
SMS Fabric — End Uses & Industry Applications
PPE Coveralls
40–60 GSM SMS and SMMS for disposable coveralls, isolation gowns, and Level B/C chemical protection garments. Single-use and limited-reuse configurations for healthcare, pharma, and industrial sectors.
Face Mask Layers
15–25 GSM SMS for outer and inner layers of 3-ply surgical masks, combining the hydrophobic barrier of the outer spunbond with the soft inner spunbond — and the meltblown filter layer integrated as the middle barrier.
Hospital Consumables
20–40 GSM SMS for wound care pads, bed sheets, pillow covers, and other hospital-use disposables requiring fluid barrier and soft touch properties. Medical Blue standard; White available.
Why Medical Manufacturers Choose Us
India's Trusted SMS Non Woven Fabric Manufacturer
13+ Years in Medical Non Woven
Established 2011, Agra. Over a decade supplying SMS non woven to surgical gown OEMs, hospital supply chains, PPE manufacturers, and medical disposable converters across India and 30+ export markets.
Aditya Birla–Grasim Rated 100/100
The highest vendor quality score in the non-woven segment. Consistent hydrohead, GSM accuracy, and layer bonding strength — critical for medical-grade SMS fabric used in certified healthcare applications.
SMS + SMMS Available
Standard SMS for AAMI Level 1–3 applications. SMMS (double meltblown, 4-layer) for higher hydrohead (≥150 mmH₂O) surgical gown and chemical-splash PPE applications requiring maximum barrier performance.
Export Documentation Handled
SMS non woven exported to UAE, Saudi Arabia, Bangladesh, Vietnam, Kenya, Turkey, and 24+ more markets. Full export documentation — including COA, BIS, OEKO-TEX, and origin certificates — handled in-house.
Related Products
Also Available from Favourite Fab
SMS Non Woven Fabric
Detailed technical specifications, GSM grades, hydrohead data, and application guide for SMS non woven fabric — the complete product page.
View Full SMS SpecsMedical Grade Non Woven
CE-compliant medical textile non woven for sterilisation pouches, surgical drapes, and certified barrier-performance hospital consumables.
View Medical GradePP Spunbond Non Woven Fabric
Full range PP spunbond 10–150 GSM — the base layer component in SMS laminate construction — available in hydrophilic and hydrophobic finishes.
View SpunbondFrequently Asked Questions
SMS Fabric Manufacturer — FAQs
What is SMS non woven fabric?
SMS (Spunbond-Meltblown-Spunbond) is a tri-layer composite non woven fabric. The outer and inner spunbond layers provide strength and softness; the middle meltblown layer provides fluid barrier protection (hydrohead ≥100 mmH₂O). SMS is the standard fabric for surgical gowns, medical drapes, and disposable protective garments.
What is the difference between SMS and SMMS non woven fabric?
SMS has three layers: Spunbond + Meltblown + Spunbond. SMMS has four layers: Spunbond + Meltblown + Meltblown + Spunbond — the double meltblown layer provides a higher hydrohead (typically ≥150 mmH₂O) and better chemical barrier performance. SMMS is used for Level 3–4 surgical gowns and higher-performance PPE coveralls. We manufacture both SMS and SMMS grades.
What GSM SMS fabric is used for surgical gowns?
AAMI Level 1 surgical gowns typically use 30–40 GSM SMS. Level 2 uses 40–50 GSM SMS. Level 3 (high fluid exposure) uses 50–60 GSM SMS or SMMS. The GSM affects fabric weight, drape, and to some extent barrier performance — though hydrohead is primarily determined by the meltblown layer quality rather than total GSM.
What is hydrohead and why does it matter for SMS fabric?
Hydrostatic head (hydrohead) measures fluid barrier resistance — the water pressure in mmH₂O that the fabric can resist before fluid penetrates. Our SMS has hydrohead ≥100 mmH₂O (standard) and ≥150 mmH₂O (medical grade). Higher hydrohead = better protection against surgical fluid splash — critical for AAMI Level 2+ gowns and PPE applications.
Can SMS fabric be exported? What certifications do you have?
Yes. We export SMS non woven fabric to 30+ countries. Certifications available: ISO 9001:2015, OEKO-TEX Standard 100. Test reports for hydrohead (AATCC 127), tensile strength (ISO 9073-3), and GSM (ISO 9073-1) provided with every shipment. Export documentation including COA, BIS, and certificate of origin handled in-house. FOB Mundra / Nhava Sheva.
Get a Quote
Source SMS Non Woven Fabric — Factory Direct India
Tell us your GSM, hydrohead requirement, and monthly volume — we'll send a free sample and competitive wholesale quote within 24 hours.