Carrier Tissue Paper Quality Checklist: What Sanitary Napkin Manufacturers Should Check Before Bulk Order

Carrier tissue sits between the SAP core and the backsheet in a sanitary napkin. Its job is narrow but critical: hold the pulp/SAP core together, resist wet-out during compression, and run without breaks on high-speed converting lines. A tissue that looks fine on a spec sheet can still fail on the machine floor if the underlying quality control was inconsistent. This checklist is written for procurement and quality teams evaluating any carrier tissue supplier — including us — before a bulk purchase order.

1. GSM consistency (not just the average)

A supplier quoting “13–15 GSM” tells you the target range, not the batch-to-batch variance. Ask for the supplier’s stated ± GSM tolerance band and request lot-wise test reports, not a single master spec sheet reused across shipments. Inconsistent GSM within a roll causes uneven core wrap tension and increases the chance of localized weak spots where the core is thinner than designed.

2. Wet and dry strength testing method

Carrier tissue must hold its structure both dry (during unwind and core-forming) and wet (once the napkin absorbs fluid in use). Ask the supplier which standard test method they use for tensile strength in both states, and whether results are shared per batch or only at onboarding. A supplier who cannot describe their testing method in specific terms is not testing consistently.

3. Pinhole rate per roll

Pinholes in the tissue allow SAP granules to migrate and cause strike-through — a direct quality failure visible to the end consumer. Ask for the accepted pinhole rate per unit area and how it is measured (visual inspection, light-table check, or automated detection). A supplier without a documented pinhole standard is passing the risk on to your line.

4. Roll width consistency

Width variance beyond a few millimeters forces your converting line to adjust tension settings mid-run, which slows throughput and increases scrap. Confirm the width tolerance in writing and ask whether it is checked at the mill or only at the exporter’s warehouse before dispatch.

5. MOQ flexibility for trial orders

A rigid, high MOQ with no trial-order option is a red flag for a new buyer relationship. Favourite Fab works with a 1000 kg MOQ, which lets manufacturers validate a batch on their own line before scaling to full container volumes. Ask any supplier whether they offer a trial quantity below their standard MOQ.

6. Lead time — quoted vs. actual

Since carrier tissue for the Indian market is largely sourced through import channels, lead time depends on shipping schedules, customs clearance, and inland logistics. Ask for the quoted lead time and then ask what happens when a shipment is delayed — does the supplier communicate proactively, or do you find out when the truck doesn’t arrive?

7. Sample availability before bulk commitment

No manufacturer should place a bulk order on a spec sheet alone. A credible supplier provides a physical sample for line trials — enough material to run a real batch, not a swatch. If a supplier resists sending a sample or only offers a small hand-swatch, treat that as a signal to look elsewhere.

8. Certification transparency

Depending on your export market and end customer requirements, you may need documentation such as food-contact safety compliance or other product certifications on the tissue itself. Ask the supplier directly which certifications apply to the specific batch you are buying — not the industry in general — and ask for the certificate, not just a verbal confirmation. If a supplier cannot produce paperwork for a specific claim, do not accept the claim.

9. Packaging for transit damage prevention

Carrier tissue is light and can be crushed, moisture-damaged, or contaminated during a long import journey. Confirm how rolls are wrapped, palletized, and protected against moisture ingress in the container. Ask what recourse exists if a shipment arrives with transit damage.

10. Supplier track record

Ask how long the supplier has been sourcing this specific product, how many sanitary napkin or diaper manufacturers they currently supply, and whether they can share the volume they move monthly. A supplier who quality-checks incoming shipments before dispatch — rather than simply reselling — is a materially different risk profile than one who has never handled the product before.

Carrier tissue technical data — sanitary pad grade

Test-method references are the recognised EDANA/ISO standards for nonwoven and tissue basis weight, tensile, and wet tensile. Confirm exact per-lot values against your incoming-QC spec sheet — see the full quality checklist.

Tying the checklist to measurable test methods

Each checklist item maps to a repeatable laboratory method, so ask for results against the standard rather than a general assurance. Basis weight (item 1) is measured to EDANA WSP 130.1 or ISO 9073-1; dry strength for unwind and core-forming (item 2) follows EDANA WSP 110.4; and wet strength once the pad absorbs fluid is measured as wet tensile in the machine direction to ISO 12625-5. Of all vetting questions, asking for a wet-tensile result — not just a dry-tensile figure — is the single most revealing one, because it isolates whether the tissue was genuinely wet-strength treated for hygiene-core duty rather than merely strong when dry. On the commercial side, do not accept a bare “13–15 GSM” target: write the supplier’s ± GSM tolerance band into the purchase order so basis-weight drift is a contractual reject criterion and your converting line holds consistent wrap tension roll to roll.

Applications

• Sanitary napkin core wrap — see the complete carrier tissue buying guide for full specifications
• Baby diaper and adult diaper SAP core wrap
• Feminine hygiene and incontinence product converting lines

Pricing & MOQ

Favourite Fab supplies imported carrier tissue paper at 13–15 GSM with a 1000 kg MOQ, quality-checked before dispatch against the criteria above. Pricing depends on order volume, shipment timing, and current import costs — contact our sales team for a current wholesale quote and to request a trial sample before committing to a bulk order.

FAQs

What GSM is standard for carrier tissue paper in sanitary napkins?

Most sanitary napkin manufacturers use carrier tissue in the 13–18 GSM range, depending on core design and machine speed. Favourite Fab supplies imported carrier tissue at 13–15 GSM. Always confirm the GSM tolerance band with your supplier, not just the target value.

How do I test carrier tissue paper quality before a bulk order?

Request a physical sample and run it on your own converting line at production speed. Check for tension consistency, pinhole occurrence, and wet-strength behavior during the core-forming and compression stages before approving a bulk purchase order.

Is there a list of carrier tissue paper manufacturers in India?

Carrier tissue used in Indian sanitary napkin manufacturing is largely sourced through import channels rather than domestic tissue mills producing to this exact spec. Favourite Fab supplies imported carrier tissue and quality-checks each batch before dispatch — evaluate any supplier, including us, against the checklist above rather than by manufacturer claims alone.

What is the MOQ for carrier tissue paper from Favourite Fab?

Favourite Fab’s MOQ for carrier tissue paper is 1000 kg, which allows manufacturers to trial a batch on their own line before committing to larger container volumes.

Can carrier tissue paper suppliers provide samples before bulk purchase?

Yes — a credible supplier should provide a working sample large enough for a real line trial, not just a hand swatch. Favourite Fab provides samples on request before any bulk order commitment.

This checklist applies identically to diaper-core carrier tissue — see Carrier Tissue Paper for Baby Diapers for diaper-scale GSM guidance.