Automotive Acoustic Insulation Nonwoven Fabric — India Manufacturer
Automotive acoustic insulation nonwoven fabric reduces road noise, engine noise, and vibration transmission inside vehicle cabins. Used in floor carpets, door panels, wheel arch liners, bonnet pads, and trunk liners, acoustic nonwoven absorbs and dampens sound energy through fibre friction and viscous flow losses. Favourite Fab supplies needle-punched PET and thermally bonded multi-layer nonwoven in 200–600 GSM for automotive Tier-1 suppliers and OEM component manufacturers across India.
Browse our full range: View all nonwoven fabric products — spunlace, spunbond, SMS, bico — with GSM, width and certification options. B2B MOQ from 500 kg.
Specifications
Product: Automotive Nonwovens
| Property | Specification |
|---|---|
| GSM | 200–600 GSM |
| Fibre | PET needle punch, PET/PP thermally bonded |
| Noise absorption (NRC) | 0.5–0.85 at 500–2,000 Hz |
| Temperature resistance | 120–150°C (PET grade) |
| Width | 160–260 cm |
| Flame retardancy | FMVSS 302 / ISO 3795 available |
| MOQ | 500 kg |
Applications
Floor carpet acoustic layer, dash insulation pad, door panel inner liner, trunk liner, wheel arch acoustic cover, bonnet (hood) insulation pad, headliner backing.
FAQ
What NRC is required for automotive floor insulation?
NRC (Noise Reduction Coefficient) 0.6–0.85 typically required for cabin floor and door insulation. Higher NRC = better absorption. Thicker, lower-density nonwoven achieves higher NRC vs thin, dense fabric. Test per ISO 354 (reverberation room) or ASTM C423.
Does automotive nonwoven need flame retardancy?
Yes for most OEM applications. FMVSS 302 (US) or ISO 3795 (global) limits horizontal burn rate to <100 mm/min. Our FR-treated PET needle punch achieves FMVSS 302 compliance. Specify FR requirement at time of order.
Full range: spunbond nonwoven fabric manufacturer India. Related: PET nonwoven fabric manufacturer India.
Automotive acoustic insulation nonwoven fabric Supplier & Wholesaler India — Bulk Sourcing
Favourite Fab is a direct Automotive acoustic insulation nonwoven fabric manufacturer, B2B supplier, and wholesale distributor based in Agra, India — serving manufacturers across India and 50+ export countries. We sell at factory-direct wholesale prices with no trader markup.
Direct Manufacturer — Agra Factory
ISO-certified production facility, 10+ years specialised in Automotive acoustic insulation nonwoven fabric. In-house QC lab with COA per batch (GSM, tensile, elongation, uniformity). Production capacity scales from 500 kg sample lots to full container loads.
Bulk Supplier — Custom Specifications
Custom GSM, width, finish, and colour available on request. Production lead time 10–15 working days after specification approval. Sample dispatch in 3–5 working days for qualification trials. Hydrophilic/hydrophobic finish and special treatments on request.
Wholesaler India — Container-Load Pricing
Wholesale pricing for B2B manufacturers, distributors, and importers. MOQ 500 kg per grade. Container-load pricing for 40ft HC orders (typically 8–15 MT depending on GSM and roll dimensions). Pan-India delivery via road and rail. Export shipping documentation included (Invoice, Packing List, COO, MTC, GSP).
Why Choose Favourite Fab as Your Automotive acoustic insulation nonwoven fabric Manufacturer + Supplier + Wholesaler
- Direct factory pricing — no middleman markup
- MOQ-friendly — supports small to large manufacturers
- Export-ready to 50+ countries with full shipping docs
- COA per batch + GRS certification where applicable
- Sample dispatch 3–5 working days
- Custom GSM, width, finish on request
- Pan-India delivery + container-load exports
Contact for wholesale price list 2026: sale@favouritehub.com | WhatsApp +91-9528811566 | Focus: automotive acoustic nonwoven manufacturer supplier wholesaler India
Technical Specifications — Automotive Acoustic Insulation Nonwoven
| Parameter | Specification |
|---|---|
| Fabric Weight (GSM) | 150–600 GSM |
| Fabric Construction | Needle-Punch (thermally bonded variants available) |
| Fibre Composition | PET (Polyester), PP (Polypropylene), recycled PET blends |
| Noise Reduction Coefficient (NRC) | 0.4 – 0.8 (frequency 500–2000 Hz) |
| Test Standard | DIN EN ISO 354 (Sound Absorption in Reverb Chamber) |
| OEM Specification Compatibility | Automotive OEM supplier quality standards (available on request) |
| Operating Temperature Range | –30°C to +120°C (continuous); up to +150°C peak (under-bonnet applications) |
| Thermal Resistance | ISO 11092 / Togmeter testing available for heat insulation grades |
| Width Range | 180 cm – 280 cm |
| Thickness Range | 4 mm – 25 mm (single-layer; multi-layer laminates on request) |
B2B Applications & OEM Use-Cases
- Tier-1 Automotive Interior Suppliers: OEM-linked Tier-1 manufacturers producing door liners, headliners, and floor carpet systems source 200–400 GSM needle-punch PET nonwoven for its NRC 0.5–0.7 performance in cabin noise reduction. Favourite Fab supplies pre-compressed rolls to match automated moulding press widths.
- Engine Bay & Under-Bonnet Insulation Converters: Suppliers of heat-and-sound composite panels for firewall, dash insulation, and engine cover liners require needle-punch nonwoven with continuous operating temperature up to +120°C and NRC values validated by DIN EN ISO 354 — both offered in our automotive acoustic grade.
- EV & Commercial Vehicle OEMs: Electric vehicle manufacturers face unique NVH (Noise Vibration Harshness) challenges from motor whine and road noise without traditional engine masking. Our high-density PET needle-punch (400–600 GSM) is used in EV battery tray liners, wheel arch covers, and underbody panels to meet stringent NVH targets.
Sourcing from Favourite Fab — MOQ, Lead Time & Customisation
Favourite Fab supplies automotive-grade acoustic nonwoven to Tier-1 & Tier-2 automotive suppliers, interior trim manufacturers, and NVH component converters from Agra, India.
- Minimum Order Quantity: 500 kg per SKU
- Lead Time (Domestic India): 7–14 working days
- Lead Time (Export): 21–30 working days
- Customisation: GSM range (150–600), thickness, PET/PP blend ratio, thermal bonding overlay, lamination with aluminium foil or PE film, custom width for moulding presses
- Certifications: ISO 9001:2015; DIN EN ISO 354 sound absorption test reports; automotive OEM-specific PPAP documentation support available
- Pricing: Competitive wholesale pricing — contact our technical sales team for application-specific quotation
Frequently Asked Questions
What NRC value should I specify for automotive cabin sound insulation?
For effective cabin noise reduction in passenger vehicles, an NRC of 0.55–0.70 (at 500–2000 Hz) is the typical automotive OEM target range. Our needle-punch PET nonwoven in the 200–350 GSM range achieves NRC 0.55–0.70 tested per DIN EN ISO 354. For premium cabin quietness (NVH targets in luxury or EV segments), NRC ≥ 0.75 can be achieved with 400–600 GSM or multi-layer laminate constructions.
Can automotive acoustic nonwoven handle under-bonnet temperature exposure?
Yes. Our automotive acoustic nonwoven (PET-based, 150–600 GSM) is rated for continuous service at up to +120°C and short-term peak exposure up to +150°C, making it suitable for under-bonnet applications such as engine covers, firewall liners, and turbo heat shields when used as the acoustic absorbing layer within a multi-layer composite.
Is recycled PET (rPET) nonwoven available for automotive sustainability targets?
Yes. We offer needle-punch nonwoven with recycled PET (rPET) content — typically 50–100% recycled fibre — for automotive OEMs pursuing sustainability certifications or recycled-content targets under programmes such as ISO 14001 or OEM-specific green procurement policies. rPET grades maintain equivalent acoustic and mechanical performance to virgin PET at comparable GSM.
Gaurav Garg
I'm Gaurav Garg, CEO of Favourite Fab, a company on a mission to revolutionize the nonwoven industry with sustainable practices. We work hand-in-hand with manufacturers and suppliers who share our commitment to eco-friendly production. With a deep interest in textile innovation, I'm passionate about educating consumers about sustainable material options and their potential to transform the nonwoven landscape.
