Diaper Raw Material Supplier India — Complete List, Specs & Pricing 2026
Setting up or scaling a diaper production line in India requires one thing above everything else: a reliable raw material supplier who understands manufacturing tolerances, consistent GSM, and on-time delivery in bulk. This guide covers every raw material used in baby and adult diaper production — with specifications, typical price ranges, and sourcing guidance for Indian manufacturers.
Favourite Fab, based in Agra, Uttar Pradesh, supplies the complete range of diaper raw materials to manufacturers across India and exports to 30+ countries. ISO 9001:2015 certified. All materials available in bulk with flexible MOQ.
Complete Diaper Raw Material List — Baby & Adult
A modern diaper has 8–12 distinct raw material components. Each layer serves a specific functional purpose — from fluid acquisition to leak prevention. Below is the full breakdown used in both baby diapers and adult incontinence products.
| Raw Material | Position in Diaper | Typical GSM / Spec | Material Type | Supplied by Favourite Fab |
|---|---|---|---|---|
| Hydrophilic Spunbond Topsheet | Top layer (skin contact) | 10–20 GSM | PP Spunbond (hydrophilic treated) | ✅ Yes |
| Acquisition & Distribution Layer (ADL) | Below topsheet | 25–50 GSM | Resin-bonded nonwoven / through-air bonded | ✅ Yes |
| SAP Powder (Sodium Polyacrylate) | Absorbent core | 200–500 g/g absorption | Super Absorbent Polymer — baby / adult grade | ✅ Yes |
| Fluff Pulp | Absorbent core (with SAP) | 300–500 GSM in core | Cellulose fluff pulp — comminuted | ❌ (refer sourcing section) |
| PE Backsheet Film | Bottom leak barrier | 15–25 GSM / 18–22 micron | Polyethylene film — breathable or non-breathable | ✅ Yes |
| SMS / SMMS Nonwoven Backsheet | Outer cover (cloth-like) | 16–25 GSM | Spunbond-Meltblown-Spunbond | ✅ Yes |
| Leg Cuff Elastic | Side leak barriers | 620–820 dtex | Spandex / Lycra elastic thread | ✅ Yes |
| Waist Band Elastic | Front/back waist | 12–20 mm width | Flat elastic — polyester/spandex blend | ✅ Yes |
| Frontal Tape (Landing Zone) | Front panel — tape landing | 60–100 GSM | PP nonwoven / BOPP film with loop | ✅ Yes |
| Magic Side Tape (Hook Tape) | Side fastening | Hook density 50–90 hooks/cm² | PP hook tape — mechanical fastener | ✅ Yes |
| Release Paper / Liner | Adhesive protection | 60–120 GSM | Silicone-coated kraft or PE | ✅ Yes |
| Hot Melt Adhesive | Core bonding / construction | Application rate: 2–8 g/m² | SIS / SEBS hot melt | ❌ (partner supply available) |
Key Raw Materials — Technical Specifications
1. Hydrophilic Spunbond Topsheet
The topsheet is the skin-contact layer. It must allow rapid fluid strike-through while remaining dry on the surface. Fibre distribution, bonding pattern, and hydrophilic treatment consistency directly affect rewet performance.
- GSM range: 10–20 GSM (standard: 12–15 GSM for baby; 18–20 GSM for adult)
- Width: Up to 3.2 metres jumbo rolls (slit to order)
- Treatment: Permanent hydrophilic finish — strike-through time <3 seconds
- Certification: OEKO-TEX Standard 100, REACH compliant
For technical specs and GSM calculation, use the GSM Calculator for Nonwoven Fabric.
2. SAP Powder (Sodium Polyacrylate)
SAP is the core absorbent material. Grade selection determines the performance ceiling of your diaper. Baby diaper grade SAP absorbs 300–500 times its own weight under pressure. Adult diaper grade is optimised for slower, sustained absorption.
- Baby diaper grade: Free swell 45–55 g/g; AUL (0.3 psi) 30–35 g/g
- Adult/incontinence grade: Free swell 50–60 g/g; gel strength optimised
- Particle size: 150–850 micron
- Packaging: 25 kg kraft bags
- MOQ: 500 kg
See the full guide: What is SAP Powder — Industrial Manufacturing Guide and Bulk SAP Powder Price List for Hygiene Manufacturers.
3. PE Backsheet Film
Two options: standard PE film (non-breathable, lower cost) and breathable microporous PE film (premium, required for skin-health claims). Breathable backsheet uses CaCO₃-filled PE stretched to create micropores — allows vapour out, blocks liquid.
- Non-breathable: 18–22 micron, MVTR <100 g/m²/24h
- Breathable: 20–25 micron, MVTR 1,500–3,500 g/m²/24h
- Width: Custom slit from 2.4m master roll
- Print: Up to 8 colours flexo printing available
4. Frontal Tape & Side Tape System
The fastening system determines re-fasten cycles and consumer satisfaction. Favourite Fab supplies the complete tape system — frontal landing zone, magic side tape, and waist tape — engineered to work as a matched set.
- Frontal tape: PP or BOPP base, loop density 30–60 loops/cm²
- Magic side tape: Hook density 50–90 hooks/cm², peel strength ≥8 N/25mm
- Re-fasten cycles: 10,000+ cycles without degrade
Detailed guide: How Diaper Front Tape is Made — From Raw Material to Final Product.
5. ADL — Acquisition & Distribution Layer
ADL sits between the topsheet and core. It rapidly acquires fluid from the topsheet and distributes it laterally before passing it to the SAP core. Without a quality ADL, re-wet and leakage rates increase significantly. Nonwoven raw material for baby diapers — full breakdown.
- GSM: 25–50 GSM
- Strike-through time: <1 second (first insult)
- Re-wet: <0.5g after three insults
- Fibre: Bi-component PET/PE through-air bonded or resin bonded
Pricing Guide — Diaper Raw Materials India (2026)
Raw material pricing varies by order volume, specification, and commodity cycles. Below are indicative ranges for Indian domestic buyers. Export pricing available on request.
| Material | Price Range (INR/kg) | MOQ | Lead Time |
|---|---|---|---|
| Hydrophilic Spunbond (10–20 GSM) | ₹90–140/kg | 500 kg | 7–10 days |
| SAP Powder — Baby Grade | ₹180–240/kg | 500 kg | 5–7 days |
| SAP Powder — Adult Grade | ₹160–220/kg | 500 kg | 5–7 days |
| PE Backsheet Film (non-breathable) | ₹110–150/kg | 300 kg | 7 days |
| Breathable PE Film | ₹180–260/kg | 500 kg | 10–14 days |
| Leg/Waist Elastic | ₹320–480/kg | 200 kg | 7 days |
| Frontal Tape | ₹240–380/kg | 200 kg | 10 days |
| Magic Side Tape | ₹280–420/kg | 200 kg | 10 days |
Prices subject to change. Contact for current price sheet and bulk discounts.
Why Source from Favourite Fab
- Single-source supply: 10 of 12 diaper raw materials from one supplier — reduces vendor complexity and freight cost
- Consistent GSM: ±2% GSM variation guaranteed across all nonwoven rolls — critical for high-speed production lines
- ISO 9001:2015 certified: Documented QC at every production stage. COA provided with every batch
- Flexible MOQ: Suitable for small manufacturers (500 kg) and large production lines (20+ MT/month)
- Pan-India delivery: Warehouse in Agra, UP — fast dispatch to Delhi NCR, Mumbai, Ahmedabad, Surat, Coimbatore, and all tier-2 manufacturing hubs
- Export experience: Shipping to 30+ countries — full export documentation, HS code support, GST-zero rating on exports
Also read: Setting Up a Diaper Factory — Investment & ROI Guide for total cost-of-production estimates including raw material spend.
How to Order — Samples & Bulk Supply
Requesting samples or a price quotation is straightforward:
- Share your product specification (GSM, width, material type, monthly volume)
- Receive sample rolls within 5–7 business days (domestic courier)
- Confirm spec and place bulk order — advance payment for first order, credit terms from second order
For urgent requirements or to discuss custom specifications, contact the Favourite Fab procurement team directly:
- 📞 +91 95288 11566 / +91 88007 75462
- ✉️ sale@favouritehub.com
- 💬 WhatsApp: +91 95288 11566
Frequently Asked Questions
What is the minimum order quantity for diaper raw materials?
MOQ varies by material: 200 kg for tapes and elastics, 500 kg for nonwoven fabrics and SAP powder. Custom lower MOQs available for first-time orders or product development — contact to discuss.
Do you supply to small or startup diaper manufacturers?
Yes. Favourite Fab works with manufacturers at all production scales — from 5,000 units/day startups to 500,000 units/day industrial lines. Smaller MOQs and sample packs are available for production trials.
What certifications cover your raw materials?
ISO 9001:2015 quality management certification covers all production. Nonwoven materials are OEKO-TEX Standard 100 and REACH compliant. MSDS/SDS documents and COA are provided with every shipment.
Can you supply raw materials matched to a specific diaper machine brand?
Yes. Provide your machine make and model (Zuiko, JWC, Curt G. Joa, GDM, etc.) along with roll width and core diameter specifications. Favourite Fab will slit and wind rolls to your machine exact infeed requirements.
Do you offer breathable PE film for premium diaper lines?
Yes. Breathable microporous PE film is stocked in standard widths. MVTR can be specified between 1,500–3,500 g/m²/24h depending on the specification grade required.
Is export supply available?
Favourite Fab exports to 30+ countries including UAE, Bangladesh, Sri Lanka, Ethiopia, Kenya, and Vietnam. GST-zero rated for exports. Full export documentation, FIRC, and HS code classification support provided.
What is the HSN code for nonwoven fabric used in diapers?
Nonwoven fabrics fall under HSN 5603 — GST rate 12%. SAP powder falls under HSN 3906 90 — GST 18%. PE backsheet film under HSN 3920. See the complete HSN Code 5603 guide for full details.
Request a Quote Today
Sourcing diaper raw materials in India should not require dealing with 8 different suppliers. Favourite Fab supplies the complete input stack — nonwovens, SAP, film, tapes, and elastics — from a single ISO-certified facility in Agra.
Contact us now for pricing, samples, and bulk availability:
- 📞 +91 95288 11566
- ✉️ sale@favouritehub.com
- 🌐 Send an enquiry online
Gaurav Garg
I'm Gaurav Garg, CEO of Favourite Fab, a company on a mission to revolutionize the nonwoven industry with sustainable practices. We work hand-in-hand with manufacturers and suppliers who share our commitment to eco-friendly production. With a deep interest in textile innovation, I'm passionate about educating consumers about sustainable material options and their potential to transform the nonwoven landscape.
