Flushable Spunlace Wipes Raw Material — Wholesale Supplier India
Sourcing flushable spunlace wipes raw material requires strict compliance, consistent dispersibility, and reliable fiber quality. Favourite Fab supplies EDANA GD4 and WIPPES Act compliant spunlace nonwoven fabric to wet wipes manufacturers, FMCG brands, and private label producers worldwide. Our viscose and lyocell-based spunlace nonwovens are engineered to disperse safely after flushing — meeting every flushability benchmark your buyers demand.
What Is Flushable Spunlace Wipes Raw Material
Flushable wipes raw material is a hydroentangled (spunlace) nonwoven fabric designed to break apart when flushed. Unlike conventional polypropylene (PP) wipes that remain intact in water, flushable grades use hydrophilic fibers — primarily viscose (rayon) or lyocell — that lose structural integrity rapidly in water turbulence.
The defining standard is dispersibility. Fabric must pass a minimum of 30 flush cycles per INDA FG501 or EDANA GD4 without clogging test apparatus. In the United States, the WIPPES Act (Wastewater Infrastructure Protection and Pollution Elimination Standards Act) adds regulatory teeth — mandating third-party verification before a wipe may carry a “flushable” claim.
For wipes manufacturers, raw material selection is the upstream decision that determines whether finished products pass compliance testing. Choosing the wrong fiber blend or GSM range leads to costly reformulation. Sourcing from Favourite Fab means the compliance groundwork is done before your production line sees the roll.
Key Applications for Flushable Spunlace Wipes Raw Material
Flushable spunlace nonwoven is the base substrate for a wide range of wet wipe products where drain-safety is a mandatory claim. Understanding which application fits which GSM and fiber grade helps procurement teams specify correctly from the first order.
Flushable toilet wipes are the largest volume segment. They require 40–55 GSM viscose spunlace with high wet tensile (to survive point-of-use load) and rapid dispersibility (to satisfy EDANA GD4). Adult incontinence cleansing wipes follow a similar specification but often require enhanced lotion retention — pushing toward 60–70 GSM. Feminine hygiene flushable wipes demand OEKO-TEX certified fiber and softer surface texture. Flushable baby wipes, sold in markets with strict retailer compliance requirements, require WIPPES Act third-party verification plus OEKO-TEX Standard 100.
Each application has distinct procurement requirements. Favourite Fab’s application engineers map your product category to the right fiber blend, GSM, and compliance documentation package before you place your first order. This eliminates the trial-and-error reformulation cycle that adds months to product launch timelines.
Flushable Spunlace Nonwoven — Specifications
| Parameter | Specification | Detail |
|---|---|---|
| Fiber Type | Viscose / Lyocell | 100% hydrophilic — no PP or PET content; fully dispersible |
| GSM Range | 40–80 GSM | Standard wet wipe range; 50–65 GSM most common for facial and baby wipes |
| Dispersibility Standard | EDANA GD4 / INDA FG501 / WIPPES Act | Passes 30-flush cycle; third-party test reports available on request |
| Tensile Strength (Dry) | MD ≥ 40 N/5cm / CD ≥ 20 N/5cm | Sufficient for converting, folding, and wet-packaging lines |
| Tensile Strength (Wet) | MD ≥ 15 N/5cm / CD ≥ 8 N/5cm | Maintains integrity during use; disperses post-flush |
| Available Width | 100 mm – 3,200 mm | Slit to customer specification; jumbo rolls available |
| Moisture Retention | ≥ 650% (fiber weight basis) | High absorbency suitable for lotion-loaded wipe applications |
| Certifications | ISO 9001, OEKO-TEX Standard 100 | Skin-safe; suitable for baby, personal care, and medical wipe grades |
Fiber Selection Guide — Viscose vs Lyocell for Flushable Wipes
Choosing between viscose and lyocell affects cost, wet tensile, dispersibility speed, and lotion compatibility. Viscose spunlace is the cost-effective standard for private label flushable toilet wipes. It disperses rapidly in water turbulence and holds lotion formulations well. GSM range 40–65 GSM covers most toilet wipe and adult cleansing applications.
Lyocell (Tencel) spunlace offers superior wet tensile strength — roughly 30–40% higher than comparable GSM viscose. This means thinner fabric (lower GSM) can deliver the same in-use performance as heavier viscose. Lyocell is also more consistent in fiber diameter, yielding a smoother surface texture. Premium facial wipes, dermatology-positioned wipes, and branded baby wipes increasingly specify lyocell or viscose/lyocell blends.
Both fiber types pass EDANA GD4 and INDA FG501 dispersibility. The selection decision is primarily driven by end-consumer positioning, margin structure, and manufacturing line speed. Favourite Fab supplies both in standard and custom GSM and can provide comparison samples for in-house evaluation.
Why Source From Favourite Fab
- Compliance-ready documentation. We supply EDANA GD4 and INDA FG501 test reports with every shipment batch. No scrambling at customs.
- ISO 9001 certified manufacturing. Quality management system audited annually. Consistent fiber denier, bonding uniformity, and GSM tolerance ±3%.
- MOQ-friendly supply. Minimum order quantities designed for growing wipes brands — not only for large FMCG conglomerates.
- Export experience in 50+ countries. We handle export documentation, HS code classification, and SGS inspection coordination routinely.
- Custom slit widths and fiber blends. Viscose/lyocell ratios adjusted per application — baby wipe, feminine hygiene wipe, household surface wipe.
- 10+ years supplying hygiene manufacturers. Application engineers understand converting line requirements and can recommend right-weight fabric.
- Consistent lead times. Stock program for standard 50 GSM and 65 GSM viscose spunlace. Indent orders for custom grades.
Converting Line Compatibility — What Wipes Manufacturers Should Know
Flushable spunlace raw material must perform through the full converting process — not just in end-use dispersibility testing. Wet wipe lines run at speeds of 150–400 cuts per minute. The nonwoven substrate must maintain sufficient dry tensile to travel through the converting line without breaks, while absorbing and retaining lotion formulations uniformly without bleed-back.
Lotion compatibility is specific to fiber type and surface finish. Some fabric finishes designed to improve softness can reduce lotion uptake or cause lotion to migrate to the roll surface during storage. Favourite Fab provides lotion compatibility guidance for common wet wipe formulations — including water-based, alcohol-free, and micellar-water formulations. We recommend requesting a converting trial with your specific lotion formula on our sample fabric before committing to volume.
Roll edge quality also matters for automated line performance. Telescoped or wavy-edged rolls cause web tracking problems on wipe converting lines. Favourite Fab’s rolls are wound to tight hardness and edge tolerances. Consistent roll geometry reduces downtime and material waste on continuous converting operations.
Pricing and MOQ
Favourite Fab offers competitive wholesale pricing on flushable spunlace wipes raw material. Pricing depends on GSM, fiber blend, order volume, and delivery terms (Ex-Works Agra / CIF port of discharge).
We do not publish fixed prices — raw fiber commodity rates fluctuate, and we pass efficiency gains directly to buyers. We encourage you to share your monthly consumption requirement, target GSM, and compliance specification. Our team will respond with a formal quotation within 24 business hours.
Contact us at sale@favouritehub.com or via WhatsApp at +91-9528811566 to request a sample and indicative pricing.
How to Order
- Share your technical requirement. Send target GSM, fiber preference (viscose or lyocell), roll width, dispersibility standard, and monthly volume to sale@favouritehub.com.
- Receive sample and quotation. We dispatch a lab sample roll within 5 business days. A formal quotation with pricing, lead time, and payment terms accompanies the sample.
- Confirm order and schedule production. Sign proforma invoice, submit advance payment, and we schedule your production slot. Email us at sale@favouritehub.com to start.
Frequently Asked Questions
Q: What makes a spunlace nonwoven genuinely flushable?
A: True flushability requires hydrophilic fibers — viscose or lyocell — that lose bonding strength in water. The fabric must pass standardised dispersibility tests (EDANA GD4, INDA FG501) confirming it breaks apart within 30 flush cycles without blocking drainage systems. Polypropylene (PP) cannot be made flushable regardless of marketing claims.
Q: Does Favourite Fab supply WIPPES Act compliant flushable spunlace raw material?
A: Yes. Our viscose and lyocell spunlace grades are formulated to meet WIPPES Act dispersibility requirements. We provide third-party test reports on request. Buyers exporting finished wipes to the US should confirm their specific lot compliance before shipping.
Q: What is the minimum order quantity for flushable spunlace nonwoven?
A: MOQ varies by grade. Standard 50 GSM viscose spunlace is available from stock in smaller quantities. Custom GSM or custom-width orders carry higher MOQ. Contact us to discuss your specific requirement — we work with growing brands as well as large manufacturers.
Q: Can you supply both viscose-only and viscose/lyocell blend spunlace?
A: Yes. We offer 100% viscose, 100% lyocell, and viscose/lyocell blend fabrics. Lyocell offers higher wet strength and is preferred for premium wipe grades. Viscose is cost-effective for standard private label wipes. Both grades pass EDANA GD4 dispersibility.
Q: What roll widths are available for spunlace wipes raw material?
A: We supply jumbo rolls up to 3,200 mm wide and can slit to any width from 100 mm upward. Common converting widths (e.g., 200 mm, 400 mm, 800 mm) are available as standard slits. Custom widths require a 5–7 day lead time.
Q: Is your flushable spunlace nonwoven suitable for baby wipes and sensitive skin applications?
A: Yes. Our spunlace fabric carries OEKO-TEX Standard 100 certification confirming it is free from harmful substances. The hydrophilic viscose fiber is soft and gentle. It is widely used in baby wipes, feminine care wipes, and dermatologically sensitive personal care applications.
Q: Do you export flushable spunlace raw material internationally?
A: Yes. Favourite Fab exports to 50+ countries across Europe, the Middle East, Southeast Asia, and the Americas. We handle HS code documentation, certificate of origin, and coordinate SGS or third-party inspection as required by the buyer’s import country.
Contact Favourite Fab
Favourite Fab is a B2B upstream raw material supplier with 10+ years of experience serving hygiene and personal care manufacturers. We supply ISO certified, compliance-documented flushable spunlace wipes raw material with reliable lead times and export capability to 50+ countries.
Ready to source flushable spunlace wipes raw material? Send your technical specification and monthly volume requirement today.
- Email: sale@favouritehub.com
- WhatsApp: +91-9528811566
- Website: favouritehub.com
Get a sample and quotation within 24 business hours. Contact us now.
Related B2B Resources
Gaurav Garg
I'm Gaurav Garg, CEO of Favourite Fab, a company on a mission to revolutionize the nonwoven industry with sustainable practices. We work hand-in-hand with manufacturers and suppliers who share our commitment to eco-friendly production. With a deep interest in textile innovation, I'm passionate about educating consumers about sustainable material options and their potential to transform the nonwoven landscape.
