Typar Equivalent Nonwoven Geotextile Supplier India
Looking for a Typar equivalent nonwoven geotextile supplier in India? Favourite Fab manufactures high-performance spunbond polypropylene geotextile with equivalent or superior specifications to Typar geotextile — at competitive wholesale pricing for construction, landscaping, and drainage applications. Export-ready supply from our Agra manufacturing facility with complete test documentation.
Typar vs Favourite Fab Spunbond Geotextile — Specification Comparison
| Property | Typar 3101 (ref) | Favourite Fab Equivalent | Test Method |
|---|---|---|---|
| Weight (GSM) | 102 | 100–110 | ASTM D5261 |
| Tensile Strength MD (kN/m) | 14.0 | 13.5–15.0 | ASTM D4595 |
| Elongation at Break (%) | 55 | 50–60 | ASTM D4595 |
| CBR Puncture (N) | 1,800 | 1,750–2,000 | ASTM D6241 |
| Permittivity (s⁻¹) | 0.9 | 0.85–1.0 | ASTM D4491 |
| UV Resistance (%) | 70% retained | ≥70% retained | ASTM D4355 |
Note: Typar is a registered trademark of Berry Global. Favourite Fab is an independent manufacturer producing equivalent-specification material.
Applications Where Typar-Equivalent Geotextile is Specified
- House wrap / building envelope: Breathable drainage plane behind cladding systems
- French drain filtration: Wrapping perforated drain pipe to prevent clogging
- Landscape fabric: Under gravel paths, driveways, and decorative stone
- Road construction separation: Sub-grade stabilisation for unpaved and paved roads
- Green roof drainage: Filter layer in extensive and intensive green roof assemblies
Why Source Typar Equivalent from Favourite Fab India
- Direct manufacturer — 30–40% cost saving vs imported Typar for equivalent projects
- Available in 1 m to 5.8 m widths, 100 m rolls
- NABL lab test reports included with every consignment
- GST invoice, BIS-compatible specifications for government tenders
- Export to UAE, Bangladesh, Sri Lanka, Vietnam with phytosanitary documentation
- Lead time: 7–15 days from order confirmation
Frequently Asked Questions
- Is your geotextile an exact replacement for Typar in construction specs?
- Favourite Fab geotextile meets or exceeds key mechanical and hydraulic properties of Typar 3101/3201. For projects where Typar is specified by name, confirm equivalency with your engineer using our test report — most specifications allow “or equivalent” substitution.
- What widths are available for house wrap applications?
- Standard rolls are 1.5 m and 2.0 m wide for construction wrap. Custom widths up to 5.8 m available for large civil projects.
- Do you supply with printed branding for private label?
- Yes. White-label printing available for distributors and building product brands with minimum order quantities. Contact our OEM team.
- What is the MOQ for export orders?
- Minimum 5,000 sqm for export. Full container load pricing available for regular importers.
Contact Favourite Fab for Typar equivalent nonwoven geotextile pricing, sample rolls, and technical data sheets. Bulk supply, custom widths, and private label available from our Agra manufacturing facility.
Technical Specifications
Favourite Fab produces PP spunbond nonwoven geotextiles that are direct performance equivalents to Typar SF27 and SF32 grades — the industry reference for high-flow drainage and subgrade separation applications. Our spunbond process delivers a filament-level bonded structure with consistent pore size and high permeability, suitable for drainage blankets, roof garden filter layers, and sports field drainage systems.
| Parameter | Value |
|---|---|
| GSM Range | 70–300 GSM |
| Fibre Type | 100% Polypropylene (PP) continuous filament, spunbond |
| Standard | ASTM D4595 (Tensile), equivalent to Typar SF27 / SF32 |
| Tensile Strength (MD) | ≥ 22 kN/m @ 100 GSM (ASTM D4595) |
| Hydraulic Permeability | 10⁻³ m/s (comparable to Typar SF series) |
| Apparent Opening Size | 0.15–0.22 mm (70–150 GSM grades) |
| UV Resistance | Stabilised — retains ≥70% tensile after 500 h UV exposure |
| Available Roll Width | 1.6 m, 2.0 m, 3.2 m, 4.0 m |
| Roll Length | 100 m – 500 m per roll |
The continuous filament spunbond structure provides significantly higher hydraulic permeability than needle-punch at equivalent GSM, making Typar-equivalent grades the preferred choice wherever high-flow drainage is the primary design criterion alongside separation.
B2B Applications & OEM Use-Cases
- Drainage Blanket Systems for Landscape & Sports Contractors: Landscape engineering firms and sports field constructors use 100–150 GSM Typar-equivalent spunbond as a filter/separation layer in aggregate drainage blankets under turf, rooftop gardens, and golf course greens — the high permeability ensures rapid vertical drainage without soil migration.
- Road Edge Drain & French Drain OEM Supply: Drainage product manufacturers and civil contractors wrapping aggregate-filled trench drains specify Typar-equivalent spunbond (150–200 GSM) for its balance of permeability and soil retention, meeting ASTM D4595 tensile requirements for mechanised installation.
- Geomembrane Protection & Drainage Composite Base: Geosynthetic composite manufacturers and waterproofing contractors incorporate 200–300 GSM spunbond as the filtration layer in drainage geocomposites and as a protective geotextile above waterproofing membranes on tunnels, basements, and bridge decks where Typar SF32-equivalent performance is specified.
Sourcing from Favourite Fab — MOQ, Lead Time & Customisation
Favourite Fab is one of India’s established suppliers of Typar-equivalent PP spunbond geotextiles, offering documented performance equivalency and competitive wholesale pricing for large project volumes.
- MOQ: 500 kg per GSM/width specification
- Domestic Lead Time: 7–14 working days from order confirmation
- Export Lead Time: 21–30 days (FOB / CIF)
- Custom Options: GSM (70–300), roll width, roll length, ASTM D4595 test certificate, performance equivalency documentation for material substitution submittals
- Quality Certifications: ISO 9001:2015 certified; test reports and material equivalency data sheets available on request
Contact our technical sales team with your project specification or Typar grade reference (SF20, SF27, SF32) for a direct equivalency offer and batch test data.
Frequently Asked Questions
Is your spunbond geotextile a genuine equivalent to Typar SF27 and SF32?
Our PP spunbond geotextile in the 100–150 GSM range is manufactured to match key performance parameters of Typar SF27 and SF32 — specifically hydraulic permeability (~10⁻³ m/s), apparent opening size (0.15–0.22 mm), and tensile strength (≥22 kN/m MD per ASTM D4595). We can provide batch test data and performance equivalency documentation to support material substitution submittals.
What makes spunbond geotextile preferable to needle-punch for drainage applications?
Spunbond geotextile is formed from continuous filaments thermally bonded at cross-over points, creating a uniform pore structure with very high hydraulic permeability. Needle-punch geotextile has higher tensile strength at equivalent GSM but lower permeability due to the denser fibre matrix. For drainage blankets, geocomposites, and French drains where flow rate is the primary criterion, spunbond Typar-equivalent grades are the preferred specification.
Can you produce Typar-equivalent geotextile in wide rolls for large drainage projects?
Yes. Standard roll widths are 1.6 m, 2.0 m, 3.2 m, and 4.0 m. For large drainage infrastructure projects, we supply rolls up to 4.0 m width with roll lengths up to 500 m. Custom widths beyond 4.0 m are available for orders ≥ 10,000 kg.
Related B2B Resources
Gaurav Garg
I'm Gaurav Garg, CEO of Favourite Fab, a company on a mission to revolutionize the nonwoven industry with sustainable practices. We work hand-in-hand with manufacturers and suppliers who share our commitment to eco-friendly production. With a deep interest in textile innovation, I'm passionate about educating consumers about sustainable material options and their potential to transform the nonwoven landscape.
