High GSM PET Nonwoven Fabric — 100–600 GSM Geotextile & Industrial Grade India
High GSM PET nonwoven fabric — Favourite Fab supplies 100–600 GSM needle-punched polyester nonwoven for geotextile road construction, railway ballast separation, drainage filtration, slope erosion control, and heavy-duty industrial filtration. High GSM PET nonwoven fabric serves as a load-bearing engineering material specified by civil engineers to IS 14324, ASTM D4595, and EN ISO 10319 standards. Available in widths up to 5.2 m — reducing installation seam frequency on large infrastructure projects.
Browse our full range: View all nonwoven fabric products — spunlace, spunbond, SMS, bico — with GSM, width and certification options. B2B MOQ from 500 kg.
What Is High GSM PET Nonwoven Geotextile
High GSM PET nonwoven geotextile is needle-punched polyester nonwoven fabric in the 100–600 GSM weight range — significantly heavier than lightweight nonwovens used in hygiene or packaging. The needle-punch process mechanically interlocks PET fibres under high-density needle penetration — producing a three-dimensional fibre structure with isotropic tensile properties and excellent puncture resistance from aggregate particles.
At 100–300 GSM, PET geotextile performs road base separation, preventing fine subgrade soils from contaminating granular road base under dynamic traffic loads. At 200–600 GSM, heavier grades handle railway subgrade separation, riverbank erosion control, landfill liner protection, and heavy-duty industrial drainage filtration where fine particle retention must be maintained under high hydraulic head.
PET is preferred over PP for geotextile applications because it is inherently UV-resistant (no additive degradation over time), has higher tensile modulus (stiffer — less deformation under load), and maintains performance at ground temperatures above 40°C where PP grades can creep. IS 14324 and ASTM D6707 specify PET nonwoven for premium geotextile applications in Indian infrastructure projects.
High GSM PET Nonwoven — Technical Specifications
| Parameter | Specification |
|---|---|
| GSM range | 100–600 GSM (standard: 100, 150, 200, 300, 400, 600) |
| Fibre | 100% PET staple, needle-punched |
| Tensile MD | 300–2,000 N/5cm (ASTM D4595) |
| Tensile CD | 250–1,600 N/5cm |
| CBR puncture resistance | 1,500–12,000 N (ASTM D6241) |
| Water permeability (k90) | 10–100 mm/s |
| AOS (apparent opening size) | 0.075–0.25 mm (O90) |
| Width | 2 m, 4 m, 5.2 m standard; custom on request |
| Roll length | 50–200 m per roll (GSM dependent) |
| UV resistance | Inherent — no additive required |
| Temperature resistance | Up to 200°C continuous |
| MOQ | 1,000 kg |
GSM Selection Guide — Geotextile Applications
Product: High Absorbent 100% Viscose Embossed Spunlace Non-Woven Fabric
| Application | IS/ASTM Spec | Recommended GSM | Key Property |
|---|---|---|---|
| Road base separation (light traffic) | IS 14324 Class A | 100–150 GSM | Tensile ≥300 N/5cm |
| Road base separation (heavy traffic) | IS 14324 Class B | 150–200 GSM | CBR ≥2,500 N |
| Railway subgrade separation | ASTM D6707 | 200–300 GSM | Tensile ≥600 N/5cm, CBR ≥4,500 N |
| Slope erosion control | IS 14324 | 200–400 GSM | High flow rate + tensile |
| Drainage filtration blanket | EN ISO 11058 | 150–300 GSM | AOS 0.1–0.2 mm, permittivity |
| River bank stabilisation | IS 14324 | 300–600 GSM | Tensile ≥800 N/5cm |
| Landfill liner protection | ASTM D6241 | 300–600 GSM | CBR ≥8,000 N |
| Geo bag (sand-filled) | BIS | 250–300 GSM | UV resistance, seam strength |
Applications
- Road construction (NHAI and state highways): PET nonwoven geotextile specified under NHAI guidelines for National Highway base course separation. 100–200 GSM grades separate subgrade soil from granular base, preventing contamination under dynamic traffic loads. Reduces long-term road maintenance cost significantly.
- Railway subgrade separation: 200–300 GSM heavy PET geotextile under ballast prevents fine subgrade soil migration into track ballast. Critical for maintaining track geometry and reducing maintenance frequency on high-speed rail corridors.
- Slope erosion and geo bags: 250–300 GSM PET needle punch for geo bags — sand-filled bags used for riverbank protection, coastal erosion control, and temporary flood barriers. Also used as erosion control blanket on cut slopes and embankments.
- Drainage filtration: 150–300 GSM PET geotextile with 0.1–0.2 mm AOS wrapped around perforated drain pipes, drainage trenches, and retaining wall drainage systems. Retains soil particles while allowing water flow.
- Landfill liner protection: 400–600 GSM heavy-duty PET as protection layer over HDPE geomembrane in landfill caps and base liners — preventing puncture from overlying aggregate or waste.
Why Source From Favourite Fab
- IS 14324 and ASTM D4595 compliant grades in stock
- Widths up to 5.2 m — fewer seams on large road and slope projects
- Custom GSM from 100–600 and custom width available
- COA per batch — tensile MD/CD, CBR puncture, AOS, permeability
- Direct manufacturer — no trader markup, competitive wholesale pricing
- Export-ready — 50+ countries, HS code documentation
- Sample dispatch 3–5 working days
Pricing and MOQ
High GSM PET nonwoven geotextile pricing varies by GSM, width, and order volume. Competitive wholesale pricing for B2B contractors and distributors. MOQ 1,000 kg per grade. Container-load pricing for 40ft HC (typically 5–10 MT for 200–300 GSM, 4 m wide rolls). Contact sales for a project-specific quote including HS code documentation.
How to Order
- Share project specifications — GSM, width, roll length, quantity, IS/ASTM standard required — via sale@favouritehub.com
- Receive quotation and COA sample data within 48 hours
- Approve sample, confirm order — production lead time 10–15 working days
- Receive shipment with full COA, test reports, and export documentation
Frequently Asked Questions
What GSM PET geotextile is required for road construction?
IS 14324 and NHAI specifications require 100–150 GSM for light-traffic road base separation, 150–200 GSM for heavy-traffic national highways, and 200–300 GSM for railway subgrade separation. Minimum tensile ≥300 N/5cm for roads, ≥600 N/5cm for railways. CBR minimum 2,500 N for roads, 4,500 N for railways. Contact us for IS 14324 test reports for your required GSM.
What width is available for geotextile PET nonwoven?
Standard widths: 2 m, 4 m, and 5.2 m. Wider rolls reduce seam count on large road and slope projects — fewer seams means faster installation and reduced overlap failure risk. Roll length is 50–200 m per roll depending on GSM and width. Custom widths available on request.
What is CBR puncture resistance in geotextile?
CBR puncture test per ASTM D6241 measures fabric resistance to puncture by aggregate particles. For road construction over sharp crushed stone: minimum 2,500–3,500 N CBR required. Our 150 GSM PET achieves ~3,000 N CBR; 300 GSM achieves ~6,500 N. Higher GSM = higher CBR — specify GSM based on aggregate particle size at your project site.
What is the difference between PET and PP geotextile?
PET geotextile has inherent UV resistance (no additive degradation), higher tensile modulus (less deformation under sustained load), and better performance at elevated ground temperatures vs PP. PP can creep under sustained load above 40°C — problematic in Indian climate. IS 14324 and NHAI specifications prefer PET for premium geotextile applications.
Can PET geotextile be used for geo bags?
Yes. 250–300 GSM PET nonwoven is the standard substrate for geo bags — sand-filled bags used for riverbank protection, coastal erosion control, and temporary flood barriers. PET UV resistance is critical for geo bags with prolonged outdoor exposure. Seam strength per ASTM D4884 available on request for geo bag fabricators.
What is the MOQ for high GSM PET geotextile from Favourite Fab?
MOQ is 1,000 kg per grade and width. For reference: 1,000 kg of 200 GSM, 4 m wide PET geotextile equals approximately 1,250 sqm. Container-load pricing for 40ft HC (5–10 MT) available. Sample rolls (5–10 m length) for site trials — dispatch within 3–5 working days.
Contact Favourite Fab
High GSM PET nonwoven fabric geotextile manufacturer India — send your project specifications for a same-day quote.
Email: sale@favouritehub.com
WhatsApp: +91-9528811566
Favourite Fab, Agra, Uttar Pradesh, India — supplying high GSM PET nonwoven geotextile to infrastructure projects across 50+ countries. Send your specifications today for a same-day quote.
PET Geotextile GSM Selection — 200, 250, 300, 400, 600 GSM Specs
For Indian infrastructure procurement, GSM selection determines PET geotextile load performance, drainage capacity, and project compliance. Below are commonly specified weights with B2B sourcing reference data.
| GSM | Tensile MD | CBR Puncture | Typical Use | Roll Width |
|---|---|---|---|---|
| 200 GSM | 600 N/5cm | 3,500 N | NH road separation, drainage filter | 4 m, 5.2 m |
| 250 GSM | 750 N/5cm | 4,500 N | Sand-filled geo bag, riverbank protection | 4 m |
| 300 GSM | 900 N/5cm | 6,500 N | Railway subgrade, slope erosion | 4 m, 5.2 m |
| 400 GSM | 1,200 N/5cm | 8,500 N | Landfill protection, heavy slope | 4 m, 5.2 m |
| 600 GSM | 1,800 N/5cm | 12,000 N | Heavy-duty separation, mining | 2 m, 4 m |
250 GSM Non Woven Geo Bag — Sand-Filled Erosion Control
250 GSM PET needle-punched nonwoven is the standard substrate for sand-filled geo bags used in riverbank protection, coastal erosion control, temporary flood barriers, and breakwater scour protection. Favourite Fab supplies 250 GSM geo bag fabric in 4 m roll width with UV-stable PET fibre — required for outdoor service life exceeding 5 years. Seam strength data per ASTM D4884 available for geo bag fabricators. MOQ 1,000 kg. Sample dispatch 3–5 working days.
High GSM PET nonwoven geotextile Supplier & Wholesaler India — Bulk Sourcing
Favourite Fab is a direct High GSM PET nonwoven geotextile manufacturer, B2B supplier, and wholesale distributor based in Agra, India — serving manufacturers across India and 50+ export countries. We sell at factory-direct wholesale prices with no trader markup.
Direct Manufacturer — Agra Factory
ISO-certified production facility, 10+ years specialised in High GSM PET nonwoven geotextile. In-house QC lab with COA per batch (GSM, tensile, elongation, uniformity). Production capacity scales from 500 kg sample lots to full container loads.
Bulk Supplier — Custom Specifications
Custom GSM, width, finish, and colour available on request. Production lead time 10–15 working days after specification approval. Sample dispatch in 3–5 working days for qualification trials. Hydrophilic/hydrophobic finish and special treatments on request.
Wholesaler India — Container-Load Pricing
Wholesale pricing for B2B manufacturers, distributors, and importers. MOQ 500 kg per grade. Container-load pricing for 40ft HC orders (typically 8–15 MT depending on GSM and roll dimensions). Pan-India delivery via road and rail. Export shipping documentation included (Invoice, Packing List, COO, MTC, GSP).
Why Choose Favourite Fab as Your High GSM PET nonwoven geotextile Manufacturer + Supplier + Wholesaler
- Direct factory pricing — no middleman markup
- MOQ-friendly — supports small to large manufacturers
- Export-ready to 50+ countries with full shipping docs
- COA per batch + GRS certification where applicable
- Sample dispatch 3–5 working days
- Custom GSM, width, finish on request
- Pan-India delivery + container-load exports
Contact for wholesale price list 2026: sale@favouritehub.com | WhatsApp +91-9528811566 | Focus: high GSM PET geotextile manufacturer supplier wholesaler India
Gaurav Garg
I'm Gaurav Garg, CEO of Favourite Fab, a company on a mission to revolutionize the nonwoven industry with sustainable practices. We work hand-in-hand with manufacturers and suppliers who share our commitment to eco-friendly production. With a deep interest in textile innovation, I'm passionate about educating consumers about sustainable material options and their potential to transform the nonwoven landscape.
